Quick fix: check these 5 reasons why your lg dryer is not starting

When your LG dryer refuses to start, it can be a frustrating experience. However, before calling for a repair technician, there are several troubleshooting steps you can take to try and resolve the issue. In this comprehensive guide, we’ll delve into the potential causes and provide step-by-step instructions to help you get your dryer up and running again.

Common Causes of LG Dryer Not Starting

• Power Supply Issues: Check if the dryer is plugged into a working outlet and that the circuit breaker or fuse hasn’t tripped.
• Door Switch Malfunction: The door switch prevents the dryer from starting if the door is not properly closed. Ensure the door is securely shut and that the switch is not damaged.
• Thermal Fuse Blown: A thermal fuse is a safety device that trips when the dryer overheats. If the fuse has blown, it will need to be replaced.
• Motor Capacitor Failure: The motor capacitor provides power to the dryer motor. A faulty capacitor can prevent the motor from starting.
• Belt Problems: A broken or loose belt can prevent the dryer drum from rotating, causing the dryer not to start.
• Control Board Malfunction: The control board is the brain of the dryer. A malfunctioning control board can prevent the dryer from starting or operating properly.
• Moisture Sensor Issues: The moisture sensor detects the dryness level of the clothes. A faulty sensor can prevent the dryer from starting or stopping prematurely.

Troubleshooting Steps

1. Check Power Supply

• Ensure the dryer is plugged into a working outlet.
• Check the circuit breaker panel or fuse box to see if any breakers have tripped or fuses have blown.

2. Inspect Door Switch

• Open and close the dryer door several times to ensure it is closing properly.
• Look for any damage or debris that may be preventing the door from closing completely.

3. Test Thermal Fuse

• Unplug the dryer and allow it to cool completely.
• Locate the thermal fuse, which is usually located near the heating element.
• Use a multimeter to test the continuity of the fuse. If the fuse is blown, it will need to be replaced.

4. Check Motor Capacitor

• Unplug the dryer and remove the back panel.
• Locate the motor capacitor, which is usually a cylindrical component with two wires connected to it.
• Use a multimeter to test the capacitance of the capacitor. If the capacitor is faulty, it will need to be replaced.

5. Inspect Belt

• Open the dryer door and look for the belt that connects the motor to the dryer drum.
• Check if the belt is broken or loose. If the belt is damaged, it will need to be replaced.

6. Diagnose Control Board

• If all other troubleshooting steps have failed, the issue may lie with the control board.
• Contact an LG authorized repair technician to diagnose and repair the control board.

7. Examine Moisture Sensor

• Clean the moisture sensor bars located inside the dryer drum.
• Use a multimeter to test the continuity of the moisture sensor. If the sensor is faulty, it will need to be replaced.

The Bottom Line: Resolving the LG Dryer Starting Issue

By following these troubleshooting steps, you can diagnose and resolve the issue preventing your LG dryer from starting. If all else fails, don’t hesitate to contact an experienced LG repair technician for professional assistance.

Frequently Asked Questions

Q: Why won’t my LG dryer start, but the light is on?
A: Check the door switch to ensure the door is properly closed. If the switch is faulty, it will prevent the dryer from starting even if the light is on.

Q: My LG dryer starts but stops after a few minutes. What could be the problem?
A: The thermal fuse may have blown due to overheating. Check the fuse and replace it if necessary.

Q: The dryer drum is not turning, but the dryer is making a humming noise. What’s wrong?
A: The belt that connects the motor to the drum may be broken or loose. Inspect the belt and replace it if needed.