The curious case of the flashing samsung dishwasher: why it’s not always a cause for concern
What To Know
- Once the washing cycle is complete, the Normal indicator will continue to flash for a few minutes to notify you that the dishes are clean.
- In rare cases, a malfunctioning sensor may cause the Normal indicator to flash even when the dishwasher is not operating.
- Yes, it is generally safe to use the dishwasher if the Normal indicator is flashing, as long as the dishwasher is operating correctly.
If your Samsung dishwasher is displaying a flashing “Normal” indicator, it may leave you perplexed. However, this flashing is a common occurrence and typically indicates that the appliance is operating correctly.
Reasons for the Normal Flashing Indicator
There are several reasons why the Normal indicator may flash:
1. Washing Cycle in Progress
During the washing cycle, the Normal indicator flashes to indicate that the dishwasher is operating as intended. The flashing will continue until the cycle is complete.
2. Rinse Cycle in Progress
After the washing cycle, the Normal indicator will continue to flash during the rinse cycle. This is to ensure that all detergent residue is removed from the dishes.
3. Drying Cycle in Progress
In some Samsung dishwasher models, the Normal indicator will also flash during the drying cycle. This indicates that the heating element is active and drying the dishes.
4. Self-Cleaning Mode
Certain Samsung dishwashers feature a self-cleaning mode that runs periodically to remove limescale and other buildup. During this mode, the Normal indicator will flash to indicate that the cleaning process is underway.
5. Delay Start Activated
If you have activated the Delay Start feature, the Normal indicator will flash until the set delay time has elapsed. The dishwasher will then begin the washing cycle automatically.
6. End of Cycle Notification
Once the washing cycle is complete, the Normal indicator will continue to flash for a few minutes to notify you that the dishes are clean.
7. Sensor Malfunction
In rare cases, a malfunctioning sensor may cause the Normal indicator to flash even when the dishwasher is not operating. This typically requires professional repair.
Troubleshooting Tips
If you encounter any unusual behavior with the Normal indicator, try the following troubleshooting tips:
- Reset the dishwasher: Unplug the dishwasher for 30 seconds and then plug it back in.
- Check the water supply: Ensure that the water supply is turned on and that there are no kinks or leaks in the hoses.
- Clean the filter: Remove and clean the filter located at the bottom of the dishwasher tub.
- Inspect the sensors: Look for any visible damage or debris that may be interfering with the sensors.
When to Call a Repair Technician
If you have tried the troubleshooting tips above and the Normal indicator is still flashing abnormally, it is recommended to contact a qualified repair technician. They can diagnose the issue and perform any necessary repairs.
Questions You May Have
1. Is it normal for the Normal indicator to flash during every cycle?
Yes, the Normal indicator typically flashes during all washing, rinsing, and drying cycles.
2. Why does the Normal indicator flash after the cycle is complete?
The Normal indicator flashes after the cycle is complete to notify you that the dishes are clean.
3. What does it mean if the Normal indicator flashes rapidly?
Rapid flashing may indicate a sensor malfunction or a more serious issue. Contact a repair technician if this occurs.
4. Can I disable the Normal flashing indicator?
No, the Normal flashing indicator cannot be disabled. It is a built-in feature to indicate the dishwasher’s operating status.
5. Is it safe to use the dishwasher if the Normal indicator is flashing?
Yes, it is generally safe to use the dishwasher if the Normal indicator is flashing, as long as the dishwasher is operating correctly.