How to reset your whirlpool washer dryer combo like a pro (even if you’re a newbie)

If your Whirlpool washer dryer combo is acting up, a reset might be just what it needs. Resetting your appliance can help clear any errors or glitches that may be causing problems and restore it to its normal working order. In this comprehensive guide, we’ll walk you through the step-by-step process of resetting your Whirlpool washer dryer combo.

Safety Precautions

Before you begin the reset process, it’s crucial to take the following safety precautions:

• Unplug the appliance from the power outlet.
• Turn off the water supply to the machine.
• Allow the washer dryer combo to cool down completely before touching it.

Step 1: Locate the Reset Button

• Front-Load Models: Most front-load Whirlpool washer dryer combos have a reset button located on the control panel. It’s usually a small, round button labeled “Reset” or “Power.”
• Top-Load Models: Top-load models typically have a reset button hidden behind the control panel. To access it, you may need to use a screwdriver to remove the panel cover.

Step 2: Press and Hold the Reset Button

• Once you’ve located the reset button, press and hold it for 5-10 seconds.
• Some models may require you to press and release the button repeatedly.

Step 3: Release the Reset Button

• After holding the reset button for the specified time, release it.
• The appliance will now begin the reset process.

Step 4: Wait for the Reset Cycle to Complete

• The reset cycle typically takes a few minutes to complete.
• During this time, the machine will make various noises and may display different lights on the control panel.

Step 5: Replug the Appliance and Turn on the Water Supply

• Once the reset cycle is complete, replug the appliance into the power outlet.
• Turn on the water supply to the machine.

Step 6: Test the Appliance

• Run a test cycle to ensure that the appliance is working properly.
• Select a short cycle, such as a rinse and spin cycle, to test the washer and dryer functions.

Troubleshooting Common Reset Issues

• No Response: If the appliance doesn’t respond when you press the reset button, ensure that it’s properly plugged in and the water supply is turned on.
• Reset Cycle Doesn’t Complete: If the reset cycle doesn’t complete after several minutes, unplug the appliance and wait a few hours before trying again.
• Error Code: If the appliance displays an error code after the reset, refer to the user manual for more information.

Additional Tips for Optimal Performance

• Reset your Whirlpool washer dryer combo every 3-6 months to maintain its performance.
• Clean the lint filter regularly to prevent lint buildup.
• Use the correct detergent and fabric softener for your appliance.
• Avoid overloading the machine.

Wrapping Up: Resetting for a Smooth-Running Appliance

By following the steps outlined in this guide, you can successfully reset your Whirlpool washer dryer combo and restore it to its optimal working condition. Remember to take the necessary safety precautions and troubleshoot any issues you may encounter. With proper maintenance and periodic resets, your appliance will provide you with years of reliable service.

Top Questions Asked

Q: How often should I reset my Whirlpool washer dryer combo?
A: It’s recommended to reset your appliance every 3-6 months.

Q: What happens if I reset my appliance too often?
A: Resetting your appliance too frequently is not necessary and may shorten its lifespan.

Q: Can I reset my appliance if it’s displaying an error code?
A: Yes, resetting the appliance may clear the error code. However, if the error code persists after the reset, refer to the user manual for more information.

Q: What should I do if my appliance doesn‘t respond when I press the reset button?
A: Ensure that the appliance is properly plugged in and the water supply is turned on. If it still doesn’t respond, unplug it and wait a few hours before trying again.

Q: How long does the reset cycle typically take?
A: The reset cycle usually takes a few minutes to complete.