Tired of error codes? fix your whirlpool washer control board with this simple guide
What To Know
- This comprehensive blog post will guide you through the step-by-step process of how to reset a Whirlpool washer control board, empowering you to restore your washer to its optimal performance.
- The control board is the brain of your Whirlpool washer, responsible for coordinating all its functions, including the wash cycle, water temperature, and spin speed.
- By following the steps outlined in this guide, you have gained the knowledge and confidence to reset the control board on your Whirlpool washer.
Are you struggling with a malfunctioning Whirlpool washer due to a faulty control board? Don’t panic! Resetting the control board is a simple and effective solution that can resolve many common issues. This comprehensive blog post will guide you through the step-by-step process of how to reset a Whirlpool washer control board, empowering you to restore your washer to its optimal performance.
What is a Whirlpool Washer Control Board?
The control board is the brain of your Whirlpool washer, responsible for coordinating all its functions, including the wash cycle, water temperature, and spin speed. When the control board malfunctions, it can lead to a variety of problems, such as:
- Inability to start the wash cycle
- Erratic water temperature
- Incomplete spin cycles
- Display errors
When to Reset the Whirlpool Washer Control Board
Resetting the control board should be considered when you encounter any of the following issues:
- The washer is not responding to commands
- The display is showing error codes
- The wash cycle is not completing properly
- The washer is making unusual noises
Safety Precautions
Before you begin resetting the control board, ensure your safety by following these precautions:
- Unplug the washer from the power outlet.
- Turn off the water supply to the washer.
- Wear protective gloves and safety glasses.
Step-by-Step Guide to Resetting the Whirlpool Washer Control Board
1. Locate the Control Board
The control board is typically located behind the washer’s front panel. To access it, remove the screws holding the panel in place and carefully lift it off.
2. Disconnect the Wires
Once the front panel is removed, you will see a bundle of wires connected to the control board. Carefully disconnect all the wires by pressing down on the release tabs.
3. Remove the Control Board
After disconnecting the wires, locate the screws securing the control board to the washer. Remove the screws and gently pull the control board out of its housing.
4. Reset the Control Board
Look for a small reset button on the control board. It may be labeled “Reset” or have a similar symbol. Press and hold the button for a few seconds.
5. Reconnect the Wires
Plug the wires back into their corresponding connectors on the control board. Ensure a secure connection by pressing down until you hear a click.
6. Reinstall the Control Board
Slide the control board back into its housing and secure it with the screws.
7. Reattach the Front Panel
Align the front panel with the washer and press it back into place. Secure it with the screws.
8. Power On and Test
Plug the washer back into the power outlet and turn on the water supply. Start a test wash cycle to ensure the control board is functioning correctly.
Other Troubleshooting Tips
If resetting the control board does not resolve the issue, consider the following troubleshooting tips:
- Check the power cord and outlet for any damage.
- Inspect the water inlet hoses for leaks or kinks.
- Clean the washer’s filter to remove any debris.
- Contact Whirlpool customer support for professional assistance.
Conclusion: Empowered Washer Maintenance
By following the steps outlined in this guide, you have gained the knowledge and confidence to reset the control board on your Whirlpool washer. This simple yet effective procedure can save you time and money by resolving common washer issues without the need for a professional repair. Remember, regular maintenance and prompt troubleshooting can extend the lifespan of your washer, ensuring years of reliable performance.
Frequently Asked Questions (FAQs)
Q: How often should I reset my Whirlpool washer control board?
A: Resetting the control board is not a regular maintenance task. Only reset it when you encounter issues that suggest a malfunction.
Q: Can I damage my washer by resetting the control board too often?
A: No, resetting the control board does not harm the washer. However, excessive resetting may indicate an underlying issue that requires attention.
Q: What if resetting the control board does not solve the problem?
A: If resetting the control board does not resolve the issue, check the power supply, water hoses, and filter. If the problem persists, contact Whirlpool customer support.