Kitchenaid dishwasher clean light flashing? here’s how to fix it fast!

A flashing clean light on your KitchenAid dishwasher can be a frustrating sight. It signals a problem that needs to be addressed promptly to ensure your dishwasher operates optimally. This guide will provide you with step-by-step instructions on how to reset the clean light on your KitchenAid dishwasher and troubleshoot any underlying issues.

1. Power Cycle the Dishwasher

The first step is to power cycle the dishwasher. This will reset the control panel and potentially solve the issue.

1. Turn off the dishwasher at the circuit breaker or fuse box.
2. Wait 60 seconds.
3. Turn the dishwasher back on.

2. Check the Filter

A clogged filter can prevent the dishwasher from draining properly, causing the clean light to flash.

1. Open the dishwasher door.
2. Locate the filter at the bottom of the dishwasher.
3. Remove the filter and clean it with hot water and a soft brush.
4. Reinstall the filter.

3. Inspect the Drain Hose

A kinked or blocked drain hose can also cause drainage issues.

1. Disconnect the drain hose from the dishwasher.
2. Inspect the hose for any kinks or blockages.
3. If the hose is kinked, straighten it out.
4. If the hose is blocked, use a drain snake to clear the blockage.
5. Reattach the drain hose.

4. Clean the Spray Arms

Clogged spray arms can prevent the dishwasher from cleaning dishes effectively, leading to the clean light flashing.

1. Remove the upper and lower spray arms.
2. Clean the spray holes with a toothpick or paper clip.
3. Reinstall the spray arms.

5. Reset the Control Panel

If the above steps do not resolve the issue, you may need to reset the control panel.

1. Unplug the dishwasher from the power outlet.
2. Wait 30 seconds.
3. Plug the dishwasher back in.
4. Press and hold the “Start/Cancel” button for 5 seconds.

6. Run a Diagnostic Cycle

Some KitchenAid dishwashers have a built-in diagnostic cycle that can help identify any errors.

1. Empty the dishwasher.
2. Close the dishwasher door.
3. Press and hold the “Start/Cancel” and “Heated Dry” buttons simultaneously for 3 seconds.
4. The dishwasher will start the diagnostic cycle.

7. Contact KitchenAid Support

If you have tried all the above steps and the clean light is still flashing, you may need to contact KitchenAid support for further assistance.

Troubleshooting Tips

• If the clean light flashes during a wash cycle, it may indicate a problem with the water supply. Check if the water supply is turned on and if the water pressure is sufficient.
• If the clean light flashes after a wash cycle, it may indicate a problem with the heating element. Contact KitchenAid support for further assistance.
• If the clean light flashes intermittently, it may indicate a loose connection. Check the electrical connections to the dishwasher and make sure they are secure.

Conclusion

Resetting the clean light on your KitchenAid dishwasher can be a straightforward process. By following the steps outlined in this guide, you can troubleshoot the issue and restore your dishwasher to optimal performance. If you encounter any difficulties or have additional questions, do not hesitate to contact KitchenAid support.

FAQ

Q: Why is the clean light on my KitchenAid dishwasher flashing?

A: The clean light can flash due to various reasons, including a clogged filter, a kinked drain hose, or a problem with the spray arms.

Q: How often should I clean the filter in my KitchenAid dishwasher?

A: It is recommended to clean the filter in your KitchenAid dishwasher every 1-2 months to prevent clogging and ensure optimal performance.

Q: What is the diagnostic cycle on my KitchenAid dishwasher?

A: The diagnostic cycle on a KitchenAid dishwasher is a built-in feature that helps identify errors in the dishwasher’s system. It can be initiated by pressing and holding specific buttons on the control panel.