Reset your kenmore dishwasher control board like a pro: the ultimate step-by-step guide

Resetting the control board of your Kenmore dishwasher can resolve various issues, including malfunctioning buttons, improper water levels, and drainage problems. Follow these simple steps to troubleshoot and restore your dishwasher’s functionality.

Step 1: Power Down the Dishwasher

Unplug the dishwasher from the electrical outlet or switch off the circuit breaker to cut off power supply. This safety precaution prevents electrical shocks during the reset process.

Step 2: Locate the Reset Button

Most Kenmore dishwashers feature a dedicated reset button. It is typically situated on the control panel or near the base of the dishwasher door. If you cannot locate the button, refer to your dishwasher’s user manual.

Step 3: Press and Hold the Reset Button

Press and hold the reset button for approximately 5-10 seconds. You may hear a beep or see the control panel lights flash, indicating a successful reset.

Step 4: Restore Power

Plug the dishwasher back into the electrical outlet or switch on the circuit breaker to restore power. The dishwasher will go through a brief initialization process before resuming operation.

Troubleshooting Common Issues

Dishwasher Not Starting

• Ensure the dishwasher is properly plugged in and receiving power.
• Check if the door is securely closed.
• Reset the control board as described above.

Dishwasher Not Draining

• Clear any food debris or clogs from the drain hose.
• Inspect the drain pump for blockages or damage.
• Reset the control board.

Dishwasher Not Filling with Water

• Check if the water supply is turned on.
• Ensure the water inlet valve is not clogged.
• Reset the control board.

Dishwasher Not Dispensing Detergent

• Check if the detergent dispenser is properly filled.
• Inspect the detergent dispenser for clogs or blockages.
• Reset the control board.

Advanced Reset Techniques

Hard Reset

If the standard reset does not resolve the issue, perform a hard reset by disconnecting the dishwasher from the power supply for at least 30 minutes. This will completely drain the capacitors and reset the control board to its factory settings.

Factory Reset

Some Kenmore dishwasher models allow for a factory reset. This option restores the dishwasher to its original default settings, erasing any custom programs or preferences. Refer to your dishwasher’s user manual for specific instructions.

Tips for Maintaining Dishwasher Control Boards

• Avoid overloading the dishwasher, as excessive weight can strain the control board.
• Use recommended detergent and rinse aid to prevent buildup on the control board.
• Regularly clean the dishwasher interior and exterior to remove any food particles or grease.
• If you experience persistent issues, contact a qualified appliance repair technician.

Wrap-Up: Regaining Control of Your Kenmore Dishwasher

Resetting the control board of your Kenmore dishwasher is a straightforward procedure that can resolve a wide range of common issues. By following the steps outlined in this comprehensive guide, you can restore your dishwasher to optimal performance and ensure years of trouble-free operation.

Frequently Asked Questions

Q: How often should I reset my Kenmore dishwasher control board?
A: Regular resets are not necessary unless you encounter specific issues.

Q: Can I reset the control board without unplugging the dishwasher?
A: In most cases, unplugging the dishwasher is recommended for safety reasons.

Q: What if my dishwasher does not have a dedicated reset button?
A: Consult your dishwasher’s user manual for alternative reset methods.

Q: Is it safe to perform a hard reset on my dishwasher?
A: Yes, a hard reset will not damage your dishwasher.

Q: Should I contact a repair technician if the reset does not resolve the issue?
A: Yes, if the issue persists after resetting, it is advisable to contact a qualified technician.