Replace your whirlpool dryer control board with ease: a quick and simple fix

A malfunctioning Whirlpool dryer control board can cause a range of issues, from the dryer not starting to the cycle not completing properly. Replacing the control board is a common repair that can be tackled with the right tools and instructions. In this comprehensive guide, we’ll walk you through the step-by-step process of how to replace a Whirlpool dryer control board, empowering you to restore your dryer to working order.

Tools and Materials You’ll Need

• New Whirlpool dryer control board
• Screwdriver (Phillips and flathead)
• Multimeter (optional)
• Electrical tape
• Wire strippers (optional)
• Safety glasses

Step 1: Safety First

Before you begin any work, ensure your dryer is unplugged from the electrical outlet for safety. Also, wear safety glasses to protect your eyes from any debris or sparks.

Step 2: Remove the Top Panel

Locate the screws securing the top panel of the dryer. Remove these screws and lift the top panel off the dryer.

Step 3: Disconnect the Power Cable

Inside the dryer, locate the power cable connected to the control board. Using a screwdriver, loosen the screws holding the power cable in place and disconnect it from the control board.

Step 4: Remove the Old Control Board

Identify the control board, usually located on the front panel of the dryer. Remove the screws securing the control board and gently pull it out of its housing.

Step 5: Check the Wiring (Optional)

If you have a multimeter, you can use it to check the continuity of the wiring connected to the control board. Replace any damaged wires or terminals as needed.

Step 6: Install the New Control Board

Align the new control board with its housing and carefully insert it into place. Secure the control board with the screws removed earlier.

Step 7: Reconnect the Power Cable

Reconnect the power cable to the new control board and tighten the screws to secure it.

Step 8: Reinstall the Top Panel

Place the top panel back onto the dryer and secure it with the screws you removed earlier.

Step 9: Test the Dryer

Plug the dryer back into the electrical outlet and turn it on. Run a test cycle to ensure the new control board is functioning correctly.

Troubleshooting Tips

• If the dryer still doesn’t work after replacing the control board, check the other components, such as the heating element, thermal fuse, or motor.
• If you hear a buzzing or humming sound when the dryer is running, it could indicate a problem with the motor or other electrical components.
• If the control board buttons don’t respond or the display is blank, there may be an issue with the wiring or the control board itself.

Wrapping Up

Replacing a Whirlpool dryer control board is a relatively straightforward task that can be completed in an hour or two. By following these step-by-step instructions and taking the necessary safety precautions, you can restore your dryer to working order and save yourself the cost of a professional repair.

Questions You May Have

Q: How do I know if my Whirlpool dryer control board is faulty?
A: Common signs include the dryer not starting, the cycle not completing, or buttons not responding.

Q: Can I replace the control board myself?
A: Yes, it’s a fairly straightforward repair that can be done with basic tools and knowledge.

Q: How much does a new Whirlpool dryer control board cost?
A: The cost can vary depending on the model, but typically ranges from $100 to $250.

Q: Is it safe to replace the control board while the dryer is plugged in?
A: No, always unplug the dryer before working on any electrical components to avoid the risk of electric shock.

Q: What other components should I check if the new control board doesn‘t fix the issue?
A: Consider checking the heating element, thermal fuse, and motor.