Tired of a wobbly dishwasher? here’s the quick fix: how to replace kitchenaid dishwasher wheels

Replacing the wheels on your KitchenAid dishwasher can be a daunting task, but with the right tools and a little guidance, it can be done with relative ease. This comprehensive guide will walk you through the necessary steps to ensure a smooth and successful replacement process.

Tools and Materials You’ll Need:

• New KitchenAid dishwasher wheels
• Screwdriver (Phillips head)
• Adjustable wrench
• Bucket or pan
• Rags

Step 1: Safety First

Before you begin, ensure your safety by unplugging the dishwasher from the power outlet and turning off the water supply.

Step 2: Remove the Dishwasher Base

Using a screwdriver, remove the screws holding the dishwasher base in place. Carefully lift the base away from the dishwasher.

Step 3: Locate and Remove the Wheels

Identify the wheels attached to the bottom of the dishwasher. Use an adjustable wrench to loosen the nuts holding the wheels in place.

Step 4: Disconnect the Water Line

Once the wheels are loose, disconnect the water line from the dishwasher. Use a bucket or pan to catch any water that may leak out.

Step 5: Remove the Old Wheels

Slide the old wheels off the dishwasher’s base. If they are stuck, gently tap them with a hammer to loosen them.

Step 6: Install the New Wheels

Slide the new wheels onto the dishwasher’s base. Ensure they are securely in place.

Step 7: Reattach the Water Line

Connect the water line to the dishwasher and tighten it using an adjustable wrench.

Step 8: Replace the Dishwasher Base

Carefully lift the dishwasher base back into place and secure it with the screws you removed earlier.

Step 9: Test the Dishwasher

Plug the dishwasher back into the power outlet and turn on the water supply. Run a test cycle to ensure the dishwasher is operating properly.

Troubleshooting Tips

• If the dishwasher is not rolling smoothly, check if the wheels are properly installed and aligned.
• If water is leaking from the dishwasher, ensure the water line is securely connected.
• If the dishwasher is wobbling or shaking, adjust the wheels to ensure they are level.

Wrapping it Up

Replacing KitchenAid dishwasher wheels is a simple task that can be completed in a few steps. By following this guide and utilizing the necessary tools and materials, you can ensure a successful replacement and restore your dishwasher to optimal functionality.

What You Need to Know

Q: How often should I replace my KitchenAid dishwasher wheels?
A: It depends on the usage and wear and tear. Generally, replacing them every 5-7 years is recommended.

Q: Can I install after-market wheels on my KitchenAid dishwasher?
A: Yes, but it’s important to ensure they are compatible with your dishwasher model.

Q: What is the average cost of replacing KitchenAid dishwasher wheels?
A: The cost varies depending on the model and whether you hire a professional. Expect to pay around $50-$150 for parts and labor.