Exclusive: the ultimate guide to replacing an amana dishwasher heating element

If your Amana dishwasher is not heating the water properly, it could be a sign that the heating element has failed. Replacing a heating element is a relatively simple repair that can be completed in about an hour. In this blog post, we will provide you with a step-by-step guide on how to replace an Amana dishwasher heating element.

Tools and Materials You’ll Need

Before you begin, you will need to gather the following tools and materials:

• New Amana dishwasher heating element
• Phillips head screwdriver
• Flat head screwdriver
• Multimeter
• Wire nuts
• Electrical tape

Safety Precautions

Before you start working on your dishwasher, be sure to unplug it from the power outlet. Also, turn off the water supply to the dishwasher.

Step-by-Step Instructions

1. Remove the Dishwasher Door Panel

The first step is to remove the dishwasher door panel. To do this, open the dishwasher door and locate the two screws at the top of the door. Remove these screws using a Phillips head screwdriver. Next, grasp the door panel at the top and pull it towards you to detach it from the dishwasher.

2. Locate the Heating Element

Once the door panel is removed, you will need to locate the heating element. The heating element is typically located at the bottom of the dishwasher tub. It is a metal tube with two wires connected to it.

3. Disconnect the Heating Element Wires

Use a flat head screwdriver to disconnect the two wires from the heating element. Be careful not to damage the wires.

4. Remove the Heating Element

Once the wires are disconnected, you can remove the heating element from the dishwasher tub. To do this, simply pull the heating element straight up.

5. Test the Heating Element

Before installing the new heating element, you should test the old one to make sure it is actually faulty. To do this, use a multimeter to measure the resistance of the heating element. If the resistance is infinite, then the heating element is faulty and needs to be replaced.

6. Install the New Heating Element

To install the new heating element, simply insert it into the dishwasher tub and connect the two wires to the heating element. Be sure to tighten the wire nuts securely.

7. Reinstall the Dishwasher Door Panel

Once the new heating element is installed, you can reinstall the dishwasher door panel. To do this, simply align the door panel with the dishwasher and push it into place. Then, insert the two screws at the top of the door and tighten them using a Phillips head screwdriver.

Troubleshooting

If you are having trouble replacing the heating element in your Amana dishwasher, here are a few troubleshooting tips:

• Make sure that the new heating element is the correct size and type for your dishwasher.
• Check the wires to make sure that they are properly connected to the heating element.
• Test the new heating element to make sure that it is working properly.

Recommendations

Replacing a heating element in an Amana dishwasher is a relatively simple repair that can be completed in about an hour. By following the steps outlined in this blog post, you can save yourself the cost of calling a repairman.

Frequently Asked Questions

Q: How do I know if the heating element in my Amana dishwasher is faulty?

A: If your Amana dishwasher is not heating the water properly, it could be a sign that the heating element is faulty. You can test the heating element using a multimeter to measure the resistance. If the resistance is infinite, then the heating element is faulty and needs to be replaced.

Q: How much does it cost to replace a heating element in an Amana dishwasher?

A: The cost to replace a heating element in an Amana dishwasher will vary depending on the model of your dishwasher and the cost of the replacement part. However, you can typically expect to pay between $50 and $100 for the part and labor.

Q: Can I replace the heating element in my Amana dishwasher myself?

A: Yes, you can replace the heating element in your Amana dishwasher yourself. However, it is important to follow the safety precautions outlined in this blog post and to have some basic electrical experience.