Diy guide: removing your aprilaire thermostat safely and easily

Maintaining a comfortable indoor environment requires a functional thermostat, and the Aprilaire thermostat is a popular choice for homeowners. However, when it comes to replacing or servicing your thermostat, it’s essential to know how to remove it safely and efficiently. This comprehensive guide will provide you with a step-by-step process on how to remove the Aprilaire thermostat from the wall, ensuring a hassle-free experience.

Tools Required

• Phillips screwdriver
• Flathead screwdriver (optional)
• New Aprilaire thermostat (optional)

Step 1: Safety First

Before you begin, ensure your safety by turning off the power to your thermostat at the circuit breaker or fuse box. This will prevent any electrical hazards during the removal process.

Step 2: Identify the Mounting Plate

Locate the mounting plate attached to the wall where your Aprilaire thermostat is installed. It is typically a rectangular or square-shaped plate with two screws holding it in place.

Step 3: Remove the Faceplate

Using a Phillips screwdriver, carefully remove the two screws that secure the faceplate to the mounting plate. The faceplate will now be loose and can be gently pulled away from the wall.

Step 4: Disconnect the Wires (Optional)

If you are replacing your thermostat, you will need to disconnect the wires from the terminals on the mounting plate. Use a flathead screwdriver to gently pry the wires loose from the terminals. Note the position of each wire so that you can reconnect them correctly to the new thermostat.

Step 5: Remove the Mounting Plate

Once the wires are disconnected, use the Phillips screwdriver to remove the two screws that secure the mounting plate to the wall. The mounting plate will now be loose and can be pulled away from the wall.

Step 6: Remove the Old Thermostat

Lift the old Aprilaire thermostat from the mounting plate. It may be held in place by a small screw or clip. If necessary, use a flathead screwdriver to release the thermostat from the mounting plate.

Step 7: Install the New Thermostat (Optional)

If you are replacing the thermostat, follow the manufacturer’s instructions to install the new thermostat onto the mounting plate. Ensure that the wires are connected correctly to the terminals.

Step 8: Reattach the Mounting Plate

Place the mounting plate back onto the wall and secure it with the two screws. Ensure that the mounting plate is level and firmly attached.

Step 9: Reattach the Faceplate

Align the faceplate with the mounting plate and gently push it into place. Secure the faceplate with the two screws.

Power Up and Test

Turn on the power to your thermostat at the circuit breaker or fuse box. The thermostat should power up and display the temperature. Adjust the temperature to your desired setting and test the functionality of the thermostat.

Key Points: Enjoy a Comfortable Home

Congratulations! You have successfully removed your Aprilaire thermostat from the wall. Whether you were replacing or servicing your thermostat, this guide has provided you with a step-by-step process to ensure a safe and successful experience. Enjoy the comfort and convenience of a properly functioning Aprilaire thermostat in your home.

What People Want to Know

Q: What do I do if I can’t remove the thermostat from the mounting plate?
A: Check if there is a small screw or clip holding the thermostat in place. Use a flathead screwdriver to release it.

Q: Can I replace the thermostat myself?
A: Yes, you can replace the thermostat yourself if you are comfortable with basic electrical work. Refer to the manufacturer’s instructions for specific steps.

Q: What should I do if I accidentally damage the wires while disconnecting them?
A: If you damage the wires, turn off the power to the thermostat immediately. Call a qualified electrician to repair the wires safely.