Is your speed queen washer drowning in water? drain it like a pro in 5 easy steps

Is your Speed Queen washer giving you trouble with draining? Don’t worry, you’re not alone. Many users have reported experiencing this issue. But don’t despair! In this comprehensive guide, we’ll provide step-by-step instructions and troubleshooting tips to help you get your Speed Queen washer draining again in no time.

Troubleshooting the Drain System

1. Check the Drain Hose

• Inspect the drain hose for any kinks or blockages.
• Ensure the hose is securely attached to both the washer and the drainpipe.
• If there are any blockages, use a drain snake to clear them.

2. Clean the Drain Pump Filter

• Locate the drain pump filter at the bottom of the washer.
• Remove the filter and clean it thoroughly with warm water and a soft brush.
• Make sure to check for any debris or hair that may be clogging the filter.

3. Test the Drain Pump

• Disconnect the drain hose from the drainpipe.
• Place a bucket under the hose and start a drain cycle.
• If water flows out of the hose, the drain pump is working correctly.

4. Check the Drain Solenoid

• The drain solenoid is responsible for opening and closing the drain valve.
• If the solenoid is faulty, the washer will not be able to drain.
• Test the solenoid by using a multimeter to check for continuity.

5. Inspect the Water Inlet Valve

• The water inlet valve controls the flow of water into the washer.
• If the valve is clogged or malfunctioning, it can prevent the washer from draining properly.
• Check the valve for any debris or damage.

6. Reset the Washer

• Sometimes, a simple reset can resolve drain issues.
• Unplug the washer from the power outlet and wait for 60 seconds.
• Plug the washer back in and start a drain cycle.

7. Contact a Professional

• If you’ve tried all the troubleshooting steps above and the washer is still not draining, it’s recommended to contact a qualified appliance repair technician.

The Bottom Line

Getting your Speed Queen washer to drain properly is essential for its optimal performance. By following the steps outlined in this guide, you can diagnose and resolve drain issues effectively. Remember, regular maintenance and cleaning can help prevent future drain problems. If you encounter any difficulties or require further assistance, don’t hesitate to seek professional help.

Answers to Your Most Common Questions

Q: Why is my Speed Queen washer not draining?

A: There could be several reasons, including a kinked drain hose, clogged drain pump filter, faulty drain solenoid, or malfunctioning water inlet valve.

Q: How often should I clean the drain pump filter?

A: It’s recommended to clean the drain pump filter every 3-6 months or more frequently if you notice any drainage issues.

Q: Can I use a drain snake to clear a clogged drain hose?

A: Yes, a drain snake can be used to remove blockages in the drain hose. Insert the snake into the hose and gently push it through until the blockage is cleared.

Q: How do I test the drain solenoid?

A: Use a multimeter to check for continuity across the solenoid terminals. If there is no continuity, the solenoid is faulty and needs to be replaced.

Q: What should I do if I’ve reset the washer and it’s still not draining?

A: If resetting the washer doesn‘t resolve the issue, it’s best to contact a qualified appliance repair technician for further diagnosis and repair.