Unclog your bissell vacuum in seconds: the ultimate guide

When your Bissell vacuum cleaner malfunctions, it can be a major inconvenience. This comprehensive guide will provide you with step-by-step instructions on how to diagnose and fix common problems with your vacuum cleaner. By following these instructions, you can save time, money, and get your vacuum cleaner back in working order quickly.

Troubleshooting Common Problems

1. Vacuum Cleaner Not Turning On

• Check Power Source: Ensure that the vacuum cleaner is plugged into a power outlet and that the power switch is turned on.
• Inspect Power Cord: Examine the power cord for any cuts or damage. If damaged, replace the cord.
• Reset Circuit Breaker: If the power cord is intact, reset the circuit breaker or fuse that powers the outlet.

2. Vacuum Cleaner Losing Suction

• Clean Filters: Clogged filters can restrict airflow, leading to reduced suction. Clean or replace the pre-motor filter and HEPA filter as per manufacturer’s instructions.
• Check Brush Roll: Remove any debris or hair wrapped around the brush roll. If the brush roll is damaged, replace it.
• Inspect Vacuum Hose: Look for any blockages or kinks in the vacuum hose. Clear or straighten the hose if necessary.

3. Vacuum Cleaner Overheating

• Clean Air Filter: A dirty air filter can cause the motor to overheat. Clean or replace the air filter.
• Check Brush Roll: A clogged brush roll can increase friction and cause the motor to overheat. Clean or replace the brush roll.
• Allow Vacuum Cleaner to Cool: Turn off the vacuum cleaner and let it cool down for a few minutes before using it again.

4. Vacuum Cleaner Making Strange Noises

• Inspect Brush Roll: Remove any debris or hair wrapped around the brush roll. If the brush roll is damaged, replace it.
• Check Vacuum Bearings: Worn bearings can cause squeaking or grinding noises. Lubricate the bearings with a silicone-based lubricant.
• Tighten Loose Components: Ensure that all screws and bolts are tightened properly. Loose components can cause vibrations and noises.

5. Vacuum Cleaner Not Picking Up Dirt

• Clean Brush Roll: Remove any debris or hair wrapped around the brush roll. If the brush roll is damaged, replace it.
• Inspect Vacuum Belt: A worn or broken belt can prevent the brush roll from rotating. Replace the belt if necessary.
• Adjust Brush Roll Height: The brush roll should be adjusted to the correct height for your flooring type. Adjust the height setting on the vacuum cleaner.

6. Vacuum Cleaner Leaking Water

• Check Water Tank: Ensure that the water tank is properly filled and the lid is securely closed.
• Inspect Water Pump: A faulty water pump can cause leaks. Replace the water pump if necessary.
• Clean Water Lines: Clogged water lines can restrict water flow and cause leaks. Clean the water lines with a vinegar solution.

7. Vacuum Cleaner Not Spraying Solution

• Check Solution Tank: Ensure that the solution tank is filled and the lid is securely closed.
• Inspect Solution Line: A clogged solution line can prevent the solution from spraying. Clean the solution line with a vinegar solution.
• Replace Solution Pump: A faulty solution pump can prevent the solution from spraying. Replace the solution pump if necessary.

Final Note

By following these troubleshooting and repair instructions, you can effectively diagnose and fix common problems with your Bissell vacuum cleaner. Regular maintenance and timely repairs will extend the life of your vacuum cleaner and ensure optimal performance. If you encounter any issues that you cannot resolve on your own, do not hesitate to contact Bissell customer support for assistance.

Frequently Asked Questions

Q: How often should I clean my Bissell vacuum cleaner filters?
A: Clean or replace the pre-motor filter and HEPA filter every 3-6 months or as needed.

Q: What type of lubricant should I use for the vacuum cleaner bearings?
A: Use a silicone-based lubricant specifically designed for vacuum cleaners.

Q: How do I know if the vacuum cleaner belt needs to be replaced?
A: If the brush roll is not rotating or making noises, the belt may need to be replaced.