Unveiled: the secret formula to restore your bissell vacuum’s suction power

If you’re experiencing diminished suction power from your Bissell vacuum, don’t despair! This comprehensive guide will empower you with the knowledge and techniques to restore your vacuum’s suction to its former glory.

Common Causes of Suction Loss

• Clogged filters: Dirty or clogged filters can obstruct airflow, reducing suction.
• Blocked hoses or tubes: Debris, hair, or other objects can accumulate in hoses and tubes, hindering suction.
• Faulty brushroll: A worn or damaged brushroll can fail to agitate carpet fibers, reducing suction efficiency.
• Full dirt tank: An overflowing dirt tank can restrict airflow and compromise suction.
• Motor issues: A malfunctioning motor can weaken the suction power of the vacuum.

Step-by-Step Troubleshooting

1. Inspect and Clean Filters

• Remove and inspect the pre-motor filter and post-motor filter.
• If the filters are dirty, rinse them thoroughly with cold water and allow them to dry completely before reinstalling.
• Replace any damaged or worn filters.

2. Check Hoses and Tubes for Blockages

• Disconnect the hoses and tubes from the vacuum.
• Inspect them for any visible blockages, such as debris, hair, or pet hair.
• Use a flashlight to check for any hidden obstructions.
• If any blockages are found, remove them carefully using a pair of pliers or a vacuum cleaner attachment.

3. Examine the Brushroll

• Remove the brushroll from the vacuum.
• Inspect the brushroll for any signs of wear, damage, or tangles.
• If the brushroll is worn or damaged, replace it with a new one.
• Remove any tangled hair or debris from the brushroll and its housing.

4. Empty the Dirt Tank

• Remove the dirt tank from the vacuum.
• Empty the contents into a trash can.
• If the dirt tank is full, it can restrict airflow and reduce suction.

5. Check for Motor Issues

• If the vacuum is not working at all or producing very weak suction, the motor may be faulty.
• Contact Bissell customer support or take the vacuum to an authorized repair center for further diagnosis and repair.

Additional Tips

• Use the correct filter type: Consult your Bissell vacuum’s user manual to determine the correct filter type for your model.
• Clean filters regularly: Regularly cleaning filters will prevent them from becoming clogged and compromising suction.
• Empty the dirt tank frequently: Avoid letting the dirt tank become too full, as this can restrict airflow.
• Inspect hoses and tubes periodically: Regularly check hoses and tubes for any blockages or damage.
• Consider a professional tune-up: If you experience persistent suction issues, consider taking your Bissell vacuum to an authorized repair center for a professional tune-up.

Wrapping Up: Reclaiming Your Vacuum’s Might

By following these troubleshooting steps and implementing the additional tips provided, you can effectively restore your Bissell vacuum’s suction power. Remember to regularly maintain your vacuum to prevent future suction issues and enjoy a clean and efficient cleaning experience.

Frequently Asked Questions

Q1. How often should I clean my Bissell vacuum filters?
A. It is recommended to clean the pre-motor filter every 3-6 months and the post-motor filter every 12-18 months.

Q2. What should I do if my Bissell vacuum is making a loud noise?
A. Loud noises can indicate a clogged filter, a blocked hose or tube, or a faulty motor. Check for blockages and clean or replace filters as needed. If the noise persists, contact Bissell customer support.

Q3. Can I use aftermarket filters for my Bissell vacuum?
A. Using aftermarket filters may void your warranty and compromise the performance of your vacuum. It is recommended to use genuine Bissell filters to ensure optimal suction and longevity.