Quick and easy: the ultimate guide to primo water cooler drainage

Maintaining a Primo water cooler is essential for ensuring a steady supply of clean and refreshing water. One crucial aspect of this maintenance is draining the cooler, which should be done regularly to prevent bacterial growth and maintain optimal water quality. This blog post will provide a comprehensive guide on how to drain a Primo water cooler, ensuring you enjoy pure and healthy water at all times.

Before You Start

Before embarking on the draining process, it’s essential to gather the necessary tools and materials:

• Clean towel or cloth
• Empty bucket or container
• Screwdriver or wrench (optional)

Step-by-Step Instructions

1. Unplug the Cooler

For safety, always unplug the water cooler from the power outlet before starting any maintenance.

2. Remove the Bottle

Lift the water bottle off the cooler by grasping the handle and pulling it straight up.

3. Drain the Reservoir

Locate the drain plug at the bottom of the reservoir. It’s typically a small, white or blue cap. Remove the cap by turning it counterclockwise.

4. Allow the Water to Drain

Place the bucket or container under the drain plug and allow the water to drain completely. This may take several minutes.

5. Clean the Reservoir (Optional)

Once the reservoir is empty, you can clean it to remove any remaining residue or bacteria. Use a clean towel or cloth dampened with a mild cleaning solution. Wipe down the interior of the reservoir and allow it to air dry.

6. Reinstall the Drain Plug

Once the reservoir is clean and dry, replace the drain plug by turning it clockwise until it’s snug.

7. Reinsert the Water Bottle

Place the empty water bottle back onto the cooler and press down firmly to ensure a proper seal.

8. Plug in the Cooler

Plug the cooler back into the power outlet and allow it to refill and chill the water.

Additional Tips

• Drain the water cooler every 2-3 weeks to maintain optimal water quality.
• If the drain plug is difficult to remove, use a screwdriver or wrench to loosen it gently.
• If you notice any foul odors or discoloration in the water, drain the cooler immediately and contact Primo customer support.
• Regularly clean the exterior of the cooler with a damp cloth to prevent dirt and dust accumulation.

Troubleshooting

The Cooler Won’t Drain

• Check if the drain plug is fully removed and not clogged.
• Ensure the cooler is unplugged from the power outlet.
• Contact Primo customer support for further assistance.

Water Leaking from the Cooler

• Tighten the drain plug.
• Check for any cracks or damage to the reservoir.
• Contact Primo customer support if the leak persists.

In a nutshell: Ensure a Fresh and Healthy Water Supply

By following these simple steps, you can effectively drain your Primo water cooler and maintain a clean and refreshing water source. Remember to drain the cooler regularly and follow the additional tips provided to ensure a consistent supply of pure and healthy water.

Answers to Your Questions

How often should I drain my Primo water cooler?

Every 2-3 weeks.

What happens if I don’t drain my water cooler?

Bacteria can grow in the reservoir, leading to foul odors and discolored water.

Can I use a cleaning solution to clean the reservoir?

Yes, but use a mild solution and rinse thoroughly.

What should I do if I notice a leak from the cooler?

Tighten the drain plug or contact Primo customer support.

How do I contact Primo customer support?

Visit their website or call 1-800-422-7746.