Unleash the power of clean: master the art of cleaning whirlpool stackable washers

Maintaining a clean Whirlpool stackable washer is crucial for its optimal performance and longevity. Here’s a comprehensive guide to help you thoroughly clean your washer and keep it running smoothly.

Materials You’ll Need:

• White vinegar
• Baking soda
• Bleach (optional)
• Soft cloths or sponges
• Old toothbrush (optional)

Step-by-Step Cleaning Instructions:

1. Unplug the Washer and Disconnect the Water Supply

Before starting any cleaning tasks, unplug the washer and disconnect the water supply to ensure safety.

2. Clean the Exterior

Wipe down the exterior of the washer with a damp cloth to remove any dirt or debris. Use a mild detergent solution if necessary.

3. Clean the Washer Tub

a. Run a Hot Water Cycle with Vinegar:

• Pour 2 cups of white vinegar into the detergent dispenser.
• Run a hot water cycle without any laundry. This will help remove mineral deposits and odors.

b. Run a Baking Soda Cycle:

• Sprinkle 1 cup of baking soda into the washer tub.
• Run a cold water cycle without any laundry. This will neutralize any remaining vinegar and further deodorize the tub.

4. Clean the Dispenser Drawers

a. Remove the Detergent and Bleach Dispensers:

• Pull out the detergent and bleach dispensers.
• Rinse them thoroughly with warm water to remove any detergent residue.

b. Clean the Dispenser Compartments:

• Use an old toothbrush to scrub any remaining detergent or bleach from the dispenser compartments. Rinse with warm water.

5. Clean the Drain Pump Filter

a. Locate the Drain Pump Filter:

• Open the access panel on the front or bottom of the washer.
• Find the drain pump filter, which is usually a small, round cap.

b. Remove and Clean the Filter:

• Carefully remove the filter and clean it under running water. Remove any hair, lint, or debris that may be clogging it.

6. Run a Bleach Cycle (Optional)

If desired, you can run a bleach cycle to further sanitize the washer.

• Add 1 cup of bleach to the bleach dispenser.
• Run a hot water cycle with no laundry.

7. Wipe Down the Exterior Again

After cleaning the interior of the washer, wipe down the exterior again with a damp cloth to remove any moisture or residue.

Tips for Regular Maintenance:

• Run a hot water cycle with vinegar every month to prevent mineral buildup.
• Clean the dispenser drawers regularly to avoid detergent buildup.
• Check the drain pump filter every few months and clean it as needed.
• Wipe down the exterior of the washer after each use to prevent dirt accumulation.

Troubleshooting Common Issues:

• My washer is not draining properly: Check the drain pump filter for clogs.
• My washer is making a loud noise: Check the drain pump for any obstructions.
• My washer is not spinning: Check the lid switch to make sure it’s working properly.
• My washer is leaking water: Check the hoses and connections for any leaks.

Wrapping Up

By following these simple steps, you can effectively clean your Whirlpool stackable washer and keep it running at its best. Regular maintenance will ensure the longevity of your appliance and prevent costly repairs in the future.

What You Need to Learn

1. How often should I clean my Whirlpool stackable washer?

• It’s recommended to clean your washer every 1-2 months, or as needed.

2. Can I use other cleaning agents besides vinegar and baking soda?

• Yes, you can use commercial washing machine cleaners as well. However, always follow the manufacturer’s instructions.

3. Is it necessary to run a bleach cycle?

• Bleach cycles are optional, but they can help further sanitize the washer and remove stubborn odors.

4. What should I do if I encounter any issues while cleaning my washer?

• If you have any difficulties, refer to the troubleshooting section in the blog post or consult the washer’s user manual.

5. How long does it take to clean a Whirlpool stackable washer?

• The cleaning time can vary depending on the level of cleaning needed. However, you should expect to spend around 30-60 minutes on a thorough cleaning.