Tired of watery counters? master the art of cleaning your primo drip tray

Keeping your Primo water dispenser clean is essential for maintaining the quality of your water and preventing the growth of harmful bacteria. One of the most important components to clean is the drip tray, which collects excess water and prevents it from spilling onto your floor. Here’s a comprehensive guide on how to clean your Primo water dispenser drip tray:

Materials You’ll Need:

• Mild dish soap
• Warm water
• Soft cloth or sponge
• White vinegar (optional)

Step 1: Unplug and Remove the Drip Tray

Before cleaning the drip tray, unplug your Primo water dispenser from the power outlet. Then, remove the drip tray by pulling it straight out of the dispenser.

Step 2: Rinse the Drip Tray

Rinse the drip tray thoroughly with warm water to remove any loose dirt or debris. You can use a soft cloth or sponge to gently wipe away any remaining particles.

Step 3: Wash with Dish Soap

Fill a bowl or sink with warm water and add a few drops of mild dish soap. Submerge the drip tray in the solution and use a soft cloth or sponge to gently wash it. Pay attention to any corners or crevices where dirt may accumulate.

Step 4: Rinse Again

After washing, rinse the drip tray thoroughly with clean warm water to remove any soap residue. Ensure that there are no soap bubbles or streaks left.

Step 5: Sanitize with White Vinegar (Optional)

For added sanitization, you can use white vinegar to disinfect the drip tray. Fill a bowl or sink with a 1:1 solution of white vinegar and water. Soak the drip tray in the solution for 15-30 minutes.

Step 6: Rinse and Dry

After sanitizing, rinse the drip tray thoroughly with clean water to remove any vinegar residue. Use a soft cloth or sponge to dry the drip tray completely before replacing it.

Step 7: Reinstall the Drip Tray

Once the drip tray is clean and dry, reinstall it into the Primo water dispenser. Ensure that it is securely in place to prevent leaks.

Maintenance Tips:

• Clean the drip tray regularly, especially if you use your water dispenser frequently.
• Empty the drip tray when it is half full to prevent overflow.
• If you notice any mold or mildew growth on the drip tray, clean it immediately with a stronger cleaning solution, such as a bleach solution.
• Replace the drip tray if it becomes cracked or damaged.

Sparkling Water, Every Time

By following these simple steps, you can keep your Primo water dispenser drip tray clean and prevent the accumulation of bacteria. Enjoy fresh, clean water every time you use your dispenser.

What You Need to Know

Q: How often should I clean my Primo water dispenser drip tray?
A: Clean the drip tray regularly, especially if you use your water dispenser frequently. A good rule of thumb is to clean it every 1-2 months.

Q: Can I use bleach to clean my Primo water dispenser drip tray?
A: Yes, but only as a last resort. Bleach is a strong chemical that can damage the drip tray if used too frequently. If you choose to use bleach, dilute it with water in a 1:10 ratio and soak the drip tray for no longer than 15 minutes.

Q: My Primo water dispenser drip tray has mold on it. What do I do?
A: If you notice mold or mildew on the drip tray, clean it immediately with a stronger cleaning solution, such as a bleach solution. Mix 1 part bleach with 10 parts water and soak the drip tray for 15-30 minutes. Rinse thoroughly with clean water and dry completely before reinstalling.