The ultimate guide to cleaning insinkerator instant hot water dispensers

An Insinkerator instant hot water dispenser is a convenient kitchen appliance that provides instant access to hot water for various tasks. However, over time, scale, mineral deposits, and other contaminants can accumulate within the dispenser, affecting its performance and hygiene. This guide will provide you with a comprehensive step-by-step process on how to clean your Insinkerator instant hot water dispenser, ensuring its optimal functionality and longevity.

Gather Necessary Tools and Materials

Before commencing the cleaning process, gather the following tools and materials:

• White vinegar
• Baking soda
• Soft cloths or sponges
• Screwdriver or hex key (optional)
• Replacement filter (optional)

Step 1: Safety Precautions

• Turn off the power supply to the dispenser at the circuit breaker or fuse box.
• Allow the dispenser to cool completely before performing any maintenance.
• Wear gloves to protect your hands from hot water and cleaning solutions.

Step 2: Remove the Filter (Optional)

Some Insinkerator models have a replaceable filter located at the base of the dispenser. If your model has a filter, use a screwdriver or hex key to remove the filter housing and replace the filter with a new one.

Step 3: Descale the Dispenser

Scale is a common issue that can clog the dispenser’s heating element. To descale the dispenser:

• Fill a large bowl or pitcher with equal parts white vinegar and water.
• Remove the aerator from the dispenser’s spout.
• Submerge the spout in the vinegar solution and let it soak for 30 minutes.
• After soaking, turn on the dispenser and let the vinegar solution run through the system for 5-10 minutes.
• Turn off the dispenser and rinse thoroughly with cold water.

Step 4: Clean the Exterior

Wipe down the exterior of the dispenser with a soft cloth dampened with water. Avoid using harsh cleaners or abrasive materials that could damage the finish.

Step 5: Clean the Spout

Use a soft cloth or sponge dipped in baking soda to clean the spout. Baking soda is a natural abrasive that helps remove stains and debris. Rinse the spout thoroughly with water.

Step 6: Clean the Reservoir (Optional)

Some Insinkerator models have a removable reservoir that can be cleaned separately. If your model has a removable reservoir:

• Remove the reservoir by following the manufacturer’s instructions.
• Fill the reservoir with warm water and add 1/2 cup of baking soda.
• Let the solution soak for 30 minutes.
• Empty the reservoir and rinse thoroughly with water.
• Reinstall the reservoir.

Step 7: Reassemble and Test

• Reattach the aerator to the dispenser’s spout.
• Turn on the power supply and let the dispenser heat up.
• Run hot water through the dispenser for a few minutes to flush out any remaining cleaning solution.

Concluding Remarks: Maintain Your Insinkerator Dispenser for Optimal Performance

Regular cleaning and maintenance of your Insinkerator instant hot water dispenser is essential for ensuring its optimal performance and longevity. By following the steps outlined in this guide, you can effectively remove scale, mineral deposits, and other contaminants, restoring the dispenser’s functionality and hygiene. Remember to consult the manufacturer’s instructions for specific cleaning recommendations and safety precautions.

Basics You Wanted To Know

1. How often should I clean my Insinkerator instant hot water dispenser?

It is recommended to clean the dispenser every 3-6 months, or more frequently if you notice any decrease in performance or water flow.

2. Can I use bleach to clean my Insinkerator instant hot water dispenser?

No, bleach is not recommended for cleaning Insinkerator instant hot water dispensers as it can damage the internal components.

3. What should I do if my Insinkerator instant hot water dispenser is not working?

If your dispenser is not working, check the power supply, ensure the filter is not clogged, and follow the troubleshooting steps in the manufacturer’s instructions. If the problem persists, contact an authorized repair technician.